millingmachine@tajane.com

VERTICAL TURRET MILLING MACHINE MX-4LW

Short Description:

Product model: MX-4LW
Workbench dimensions:1270X254mm
Displacement :810X360X380mm
End of spindle to worktable:400mm
Remarks:NT30 Spindle,Triaxial grating ruler,X.Y Electronical power feeder,
Z Rapid movement。

 

 

7ec17839


Product Detail

Product Parameters

Product Tags

4LW2
Taiwan’s original drawings manufacturing process

Mihanna Casting Natural Failure of Bed Components Elimination of Internal Stress by Tempering Treatment

4HG详情页_04

4LW34LW44LW55HG_095HG_10


  • Previous:
  • Next:

  • 名称 4号立卧炮塔铣MX-4LW技术参数 6号立卧炮塔铣MX-6LW技术参数
    工作台面积 1270x254mm 1370x330mm
    Table area
    纵向行程(左右X方向) 775-810mm 1030mm
    Longitudinal travel (left and right X direction)
    横向行程(前后Y方向) 360mm 400mm
    Transverse stroke (front and rear Y direction)
    垂向行程(上下Z方向) 360mm 380mm
    Vertical stroke (upper and lower Z direction)
    工作台载重 300KG 500KG
    Table load
    主轴端面到工作台距离 370mm 700mm
    Spindle end face to worktable distance
    主电机功率 3HP 5HP
    Main motor power
    电压 三相380v(或220V/415V/440v) 三相380v(或220V/415V/440v)
    voltage
    频率 50/60Hz 50/60Hz
    frequency
    主轴锥孔 NT30主轴 NT40主轴
    taper hole of spindle
    主轴级速 16 16
    Spindle stage speed
    低速 80/135/210/325/660/1110/1750/2720 80/135/210/325/660/1110/1750/2720
    low speed
    高速 160/270/420/650/1320/2220/3500/5440 160/270/420/650/1320/2220/3500/5440
    high speed
    主轴行程 120mm 120mm
    travel of spindle
    套筒 85.725mm 105mm
    jacket
    T型槽 16x3x65mm 16x3x65mm
    T-groove
    滑枕伸出臂 520mm 520mm
    Sliding pillow outstretched arm
    机床外形尺寸 1920/1770/2000mm 1980/1750/2050mm
    Machine tool shape dimension
    重量 1800KG 2300KG
    weight
    配置对比 MX-4LW MX-6LW
    Configuration contrast
    光栅尺 X、Y、Z三轴光栅尺 X、Y、Z三轴光栅尺
    Grating ruler
    工作台纵向(左右X方向) 自动进给电子走刀器 机械齿轮式走刀器
    Table longitudinal direction ( left and right X directions )
    工作台横向(前后Y方向) 自动进给电子走刀器 机械齿轮式走刀器
    Table transverse (front and rear Y direction)
    工作台垂向(上下Z方向) 快速上、下升降 快速上、下升降
    Vertical worktable (up and down Z)
    夹头组 NT30夹头组15件套装 NT40夹头组15件套装
    Chuck group
    拉杆 M12拉杆 M16拉杆
    bar
    导轨形式(X、Y、Z) X向燕尾导轨,Y、Z向矩形方轨▲■▲ X向燕尾导轨,Y、Z向矩形方轨▲■■
    Guide rail form
    Write your message here and send it to us