millingmachine@tajane.com

VERTICAL TURRET MILLING MACHINE MX-4HG

Short Description:

Product model:MX-4HG
Workbench dimensions:1270X254mm
Displacement :775X360X360mm
End of spindle to worktable:470mm
Remarks:  R8 Spindle,Triaxial grating ruler,X.Y Electronical power feeder。7ec17839


Product Detail

Product Parameters

Product Tags

Taiwan's original drawings manufacturing process

Mihanna Casting Natural Failure of Bed Components Elimination of Internal Stress by Tempering Treatment

4HG详情页_04

 

4HG详情页_05

4HG详情页_06

4HG详情页_07

4HG详情页_08

4HG详情页_10

4HG详情页_11

4HG详情页_12


  • Previous:
  • Next:

  • 名称 4号炮塔铣MX-4HG技术参数 5号炮塔铣MX-5HG技术参数
    工作台面积 1270x254mm 1372x305mm
    Table area
    纵向行程(左右X方向) 775-810mm 900mm
    Longitudinal travel (left and right X direction)
    横向行程(前后Y方向) 360mm 420mm
    Transverse stroke (front and rear Y direction)
    垂向行程(上下Z方向) 360mm 360mm
    Vertical stroke (upper and lower Z direction)
    工作台载重 300KG 400KG
    Table load
    主轴端面到工作台距离 470mm 500mm
    Spindle end face to worktable distance
    主电机功率 3HP 5HP
    Main motor power
    电压 三相380v(或220V/415V/440v) 三相380v(或220V/415V/440v)
    voltage
    频率 50/60Hz 50/60Hz
    frequency
    主轴锥孔 R8主轴或NT30主轴 NT40主轴
    taper hole of spindle
    主轴级速 16 16
    Spindle stage speed
    低速 80/135/210/325/660/1110/1750/2720 80/135/210/325/660/1110/1750/2720
    low speed
    高速 160/270/420/650/1320/2220/3500/5440 160/270/420/650/1320/2220/3500/5440
    high speed
    主轴行程 120mm 120mm
    travel of spindle
    套筒 85.725mm 105mm
    jacket
    T型槽 16x3x65mm 16x3x65mm
    T-groove
    滑枕伸出臂 520mm 520mm
    Sliding pillow outstretched arm
    机床外形尺寸 1650/1650/1900mm 1800/1750/2000mm
    Machine tool shape dimension
    重量 1450KG 1700KG
    weight
    配置对比 MX-4HG MX-5HG
    Configuration contrast
    光栅尺 X、Y二轴光栅尺(※三轴选配) X、Y、Z三轴光栅尺
    Grating ruler
    工作台纵向(左右X方向) 自动进给电子走刀器 自动进给强力电子走刀器
    Table longitudinal direction ( left and right X directions )
    工作台横向(前后Y方向) 手动进给(※增加自动进给选配) 自动进给强力电子走刀器
    Table transverse (front and rear Y direction)
    工作台垂向(上下Z方向) 手动进给(※增加自动进给选配) 快速上、下升降
    Vertical worktable (up and down Z)
    夹头组 R8夹头组12件套装或NT30夹头组15件套装 NT40夹头组15件套装
    Chuck group
    拉杆 M12拉杆 M16拉杆
    bar
    导轨形式(X、Y、Z) X、Z燕尾轨,Y向矩形方轨▲■▲ X向燕尾导轨,Y、Z向矩形方轨▲■■
    Guide rail form
    Write your message here and send it to us